CONTAINERIZED BURNER FOR INCINERATING HAZARDOUS AND NON HAZARDOUS WASTES (BOTH DOMESTIC As Well As INDUSTRIAL) AT A MINIMUM PRICE OF 300KG/HR WITH THE COMPLYING WITH REQUIREMENTS:

Ø PRIMARY CHAMBER VOLUME 7.2 M ³

Ø BURNING CAPACITY 300Kgs/hr.

Ø PRIMARY CHAMBER TEMPERATURE 850 ⁰ C AND SECONDARY CHAMBER TEMPERATURE LEVEL 1100 ⁰ C

Ø REFRACTORY DENSITY 225MM; REFRACTORY WITHSTAND TEMPERATURE 1400 ⁰ C

Ø RAM LOADER CAPACITY 0.75 M ³; FUNCTIONAL CYCLES EACH DAY 8-16 Humans resources.

Ø GAS DIESEL/NATURAL GAS; VARIETY OF PRIMARY BURNERS & & SCORE: 2 @ 250kw

Ø VARIETY OF SECONDARY BURNERS & & RANKING: 2 @ 400kw; ELECTRIC SUPPLY 230V 60Hz

Ø CONTAINER TIPPER, MONITORING SYSTEM, CLEANSING SYSTEM

Ø GAS CLEANING AND ALSO GAS MONITORING.MSW1000 General Medical Waste Incinerators melt price approximately 100kg/hr
A2400 Animal/ fowl Waste Incinerators burn rate as much as 200kg/hr. Laboratory waste Management system
01. Liqued water filtration system.
02. Number of laboratories – 05
03. The approximated liquid water waste – 6000 L including
a. chemicals
b. contaminants
c. Bio Hazardous products.
Temporary alloted room for filtrations system- 30×× 20.
The following need to be indicating in the biding document.
1. Technique of getting rid of treated waste water.
2. Method of disposing of the sludge.
3. To comply with ISO standard/regulations of Central Environment Authority [CEA] 4. Period for building and construction.
5. Request the cost for every thing of the project [Consultancy/designing/construction] For the whole task.
6. Guarantee period as well as maintaincne.

Primary chamber – Consists of a monolithic high grade refractory concrete with high grade insulation backing, . Utilising a refractory hearth or equivalent for continuous ash removal.

Secondary Chamber – Consists of high density, low thermal mass refractory ceramic fibre with an innovative low emissivity protective coating. bio medical waste treatment plant ( Incineration )with panel.

SOLID WASTE INCINERATOR    Feeding Capacity:    200 to 220 Kg.
Burn Rate *    60 Kg / hr
Ingredients to be burned    Cotton, Rubber, PVC Sheets, PE Gloves, Oil, Plastic Bottles, Paper etc.
Chambers *    Dual Chamber.
1: Primary Controlled Air
2: Secondary Excess Air
Temperature Monitoring    Required
Temperature Control to Primary & Secondary Chambers    Required
System Status & Alarms    Required for all necessary parameters.
Fittings & Accessories    Complete Package is required ( Including Nozzles & Flanges etc.)
Installation Requirements.    As low as possible . Almost Plug & Play type.
Dimensional Sketch, Operation & Installation Manuals.    Required
Off – Gas System    Required
Heat Insulation    Required for indoor installation
Delivery    Karachi Sea Port – Pakistan

The details of Components of incinerator is as follows:
Component Name        Features                 Range.
Primary Chamber    Temperature Required*    800 – 1000 deg C.
Heating Source    Natural Gas

Secondary Chamber    Temperature *    1100 – 1300 deg. C
Heating Source    Natural Gas + Propane or Fuel Oil as an additional source
Off – Gas Residence Time     2 Seconds.
Refractory Material    Material *    Alumina ( 56 – 80 % Pure )
Lining *    SS 316L
Life Span *    10 – 15 years.
Rating Temperature    1600 – 1800 deg. C
Media    Slightly acidic
Insulation    Material    Ceramic Fiber
Thickness    25 “ minimum
Feeding & Ash Removing     System    Air Tight ventilating locked doors ( Feeding from Top will be preferred)
Spares    Required for 5 Years trouble free operation

Waste calorific value: 4000KCAL/KG
Wetness Web content: 10-25%.
Nominal Capability: 50Kg/Hour batch load.
Secondary Chamber: 2 Secs @ 850degrees C.
The main combustion chamber should ensure minimal departure temperature level is not less than 850 degrees C.

INSULATION.
Calcium Silicate.
Restricting Continuous service restriction 1000 degrees C.
Thickness 25mm

THROUGHPUT.
50kg/hour at a small calorific worth of 4,000 kcal/kg as well as an average bulk thickness of 120kg/MCubed for basic waste and 160kg/MCubed for healthcare waste.All sorts of chemicals compounds (Biocides) that made use of for Oil procedure sites (water base Drilling, oil operating facilities for the corrosion and also others: The instances of the biocides are “WS-36, HAI-85M, SOFT DRINK ASH, DSMA, MICRO MATRIX, CALCIUM CARBONATE PENALTY, BARAKLEAN, GILSONITE, MIXED WASTE DIRT CHEMICALS, ZINC CARBONATE, CAUSTIC SOFT DRINK, ENVIROTHIN, BARAZAN D,. etc) as well as the materials are fluid and strong.

2. In regards to the amount of shedding the waste, maybe 200 – – 500 kg per hr.

3. Our Operational time can be in Day as well as can be at night.

4. Can you please provide me the expense of device operated with Diesel and Gas.The primary combustion chamber is the major structure of the burner, produced from light steel plate and stiffened with rolled steel sections. It is carried from the floor level on a significant steel support structure. Internally the covering is lined with calcium silicate insulation and also a warm face combination of incredibly duty brickwork or high strength castable.
The key burning chamber should make sure minimum departure temperature level is not much less than 850 ° C
. One Hands-on Lots Incinerator making up:.
·???????? Guidebook Loading door.
·???????? Horizontal strong fireplace, refractory lined main combustion chamber. Approximate dimensions 800 mm sizes x 2100mm long.
·???????? Complete sized bulk load/ash elimination door.
·???????? 1 off diesel-fired ignition heater– temperature managed.
·???????? 1 off burning air supply follower as well as distribution system, automated control.
·???????? High capability additional burning chamber with residence time not much less than 2 secs @ >> 850 ° C. ·???????? 1 off diesel-fired afterburner– temperature managed.
·???????? Control panel– automated operation.
e????? Temperature indicator key and also secondary chambers 0-1200 ° C.
e????? Refractory lined flanged smokeshaft to a height of 10M over ground degree

Huge incinerators – – INDUSTRIAL INCINERATORS – – specs below.

2.) Dimension need for the burners is 750 — — 850 kg capability

3.) The bum rate need to be 80 LL 100 kg/ hour.

4) The key chamber shouId have an operating temperature level of 900 -1200 degree C.

5) The incinerator must despise a high temperature second chamber as well as 2 second gas
retention time at 850- 1150 degree C so that it appropriates for high threat materials.

6). The incinerator must have temperature level monitoring and thermostat control for ease of
operation and also guarantee of bottom temperature to validate right procedure.

7). The burner should be capable of shedding any of the hazardous wastes listed in the
subsequent area.

8) The burner should can burning diesel oil and also need to consist of a bigger gas
tank (10-500 litres) and also generator (3 –– 40 kV )established that can be carried on the trailer with the
incinerator to make sure that the device needs no exterior electrical power supply.

9.) The burner needs to be trailer mounted so that it is a po

Contaminated materials to be Incinerated

Unsafe strong chemical:

Different types of combustible solids, made use of textiles, oil, as well as toner cartridges, chemicals
for water purification and photo consumables and plastic product, vacant
plastic/metal cans that still contain remnant unsafe material, oil absorbing.

Harmful liquid chemical:

Generally various kinds. of Acid, Paint, Varnish, Acetone, White Spirit Aromatic-less
Solvents, Artificial Liquid for Break Solutions, Aircraft De-icing Fluid, Hydraulic as well as
Compressor oil, Freon, made use of in some older refrigeration systems, Pesticide liquid/spray, air
freshen spray and various other similar chemicals.

Polluted gas:
Mostly diesel or gasoline infected by water or solvents.

Used and/or Infected oil:

Made use of electric motor oils and/or mineral oils unfit for their originally meant use. Primarily electric motor
and also transmission oil (roughly 80%) polluted by a mix of white spirit and also acetone (about 51%), hydraulic fluid (about 5%).

Infected water:

Waste oilshvater, leaches, hydrocarbons/water blends, solutions and also leachate.

Polluted soil:

Soil contaminated by oil, gas or 11 chemicals.
Contaminated soil polluted by chemicals that needs to be reused in land fill.
Polluted dirt—— treated and replaced on website.

Oil Contaminated Solids
Rags, Absorbents, Cardboard, oil and also fuel filters, air filters are rule out as harmful materials.

Electronic waste:

Waste electric or digital home appliances or settings up, including printed circuit card,
containing toxic material and/or heavy metal and/or emitting low radiation.

Utilized battery cells:

Dry battery, UPS battery or other types, unsorted waste batteries/ battery cells, having
products that are hazardouy.

Utilized lead-acid batteries:
Waste lead-acid batteries, rained/un-drained, and entire or smashed.

Harmful clinical waste:

Professional and related waste, arising from clinical, nursing or similar techniques and also waste
generated in facilities throughout the investigation or therapy of individuals (bio danger).

Ran out medications, strong:

Waste drugs, drugs and also medications, consisting of delicate medicines.

Ended drugs Iiquid:

Waste liquid pharmaceuticals, various type fluid chemicals for therapy, medical
grease, as well as paraffin based xpired medicines.

Ran out and/or infected fod:

Spoiled fresh food or unusable MRE’s (Meal Ready for Consume – – dry food)

Onsite Training and also Assem Option for Industrial Incinerators

I. The prospective buyers ought to includ 1a rate in their deal for training in a central location (Goma or
Bukavu) approximately 15 personnel in the operation and upkeep of the
devices.

Smart Ash Incinerators

1. Size requirement for the burners is that the device collaborates with a 55 gallon open finished
steel drum.
2. The system should operate wit. no gas and also use just 120V or 220V electrical energy for the blowers.
3. The system needs to can melting oil polluted wastes and also medical wastes with a dampness material of 0-15% J.
4. Each device ought to include two steel drums, to ensure that a spare drum is available.

Spare Components Choice.
If there are any type of supplier suggested spare components, that list as well as cost ought to be consisted of as a choice in the deal.

Supply, setup and testing of clinical waste burner with a capability of 75 kg/ hr gas (LPG) total with all accessories and also as a result with the chimney based on the technical specs as well as conditions of public wellness
make a space for the incinerator that fit 3 incinerators as in thing 3.1.1 and affixed to the burner room waste store that suit waste for a period of seven days as well as all the buildings of enhanced concrete with preparingg burner building and also shop with all the work of wiring, electrical as well as illumination systems, water supply and also sanitation
supply incinerator building as well as the waste stockroom with a fire extinguish sprinkler system relies on the source of the water from network of teh basic site, along with a fire alarm system contains sensing units for warm, smoke and this system is linked with the medical facility emergency alarm systems
Supply, setup as well as screening of the air flow system of the incinerator room and also the stockroom with fans ROOF COVERING TOP EXHAUET FOLLOWERS offering them with filters with high performance (HEPA FILTER trip to draw fans with taking the air modification price of 5 times per hr with streams and also air required grilles
Supply, setup, testing different conditioning unit for waste database DUCTED SPLIT UNITES and capability enough to maintain the interior temperature level at 14 degrees Celsius in summertime and winter
Supply, installation, screening of the cooling shop of shielded premade wall surfaces inside the waste room with a capacity of 35 cubic meters to conserve the medical waste at a temperature of no Celsius till shedding including the cooling unit and all accessories
UNSAFE wood.
play timber.
petroleum residual waste.
hydraulic hose system.
calcium hydroxide bags.
bags or wooden boxes including cyanide.
medical waste.
filters.
pharmaceuticals.
NO HAZARDOUS sawdust.
plastic.
plastic and also textil awnings.
wood.
plastic bathtubs.
rubber.
hygienic waste.
EPPs.
plastic bags.
building and construction recurring.
infected dustcloths or towels.
plastic or packaging of food.
polyestirene dishes, glasses, spoon, fork, etc.Capacity incinerator clinical waste to high burning temperature level.
With a smokeless gadget to shield the setting as well as with two combustion chambers furnished with gas burners or oil.
– burner to shed large volume items of 70 cm.
discrepancy: Automatic Control System.
– destructive capability from 20 to 30 kgs.
First-room/ Temperature = 900 ° C combustion.
Second room/ Temperature level = 1200 ° c afterburner

Burring Capacity 100/ 200 KG/ human resources Please create your offer here
Variety of Heater 02 Nos Please write your deal here
Incinerator Type Double Chamber
Main Chamber
Secondy Chamber Please write your offer here
Burner Layout Controlled Air Please compose your offer below
Gas to be made use of Gas/ Deisel Please write your offer here
Packing System Guidebook/ Batch Type Please create your offer here
Warmer Time 20 minutes Please create your deal below
Sort of Paint Heat Resistance enamel paint Please compose your offer below.1. Gasoline: diesel

2. Intake: 8-10liter/ hour

3. Ability: to cremate (carrion and also spoils) 350-400kg/ hour

4. Temperature level: 900-1350? C

5. Operation temperature: -30 ~ 40? C

6. Burner weight: 1800-2000 kg

7. Quantity: 0.70-0.80 m/cube

8. Outside measurement: 1.4-1.6 * 1.0-1.15 m (L * W)

SMART ASH INCINERATORS FOR THE DISPOSAL OF HAZARDOUS WASTE
? Amount: 20 units
? The Burner works with a 55 gallon open finished steel drum
? The unit operates without fuel and utilized only 120v or 220v electrical power for the blowers
? Unit can melting oil infected waste and also medical wastes with a moisture material of 0 to 15%.
? Each unit is provided with 2 steel drums, to make sure that a spare is readily available.
? Each unit to be provided with suggested spare components.
? Service warranty– minimum one year from invoice as well as approval.
? User’s manual to be offered in French and English

HAZARDOUS WASTE TO BE INCINERATED

Dangerous Solid Chemicals.
Different sorts of flammable solids, made use of textiles, oil and toner cartridges, chemicals for water filtration and also photo consumables, and plastic product, empty steel/ plastic cans that still have residues of dangerous products, oil absorptive

Unsafe Fluid Chemicals.
Mostly various types of Acid, Paint, Varnish, White Spirit, Aromatic-Less Solvents, Artificial Fluid For Brake Solutions, Aircraft De-icing Liquid, Hydraulic And Also Compressor Oil, Freon used in some older refrigeration systems, Pesticide Liquid/Spray, Air Refresh Spray and various other comparable chemicals

Infected Gas.
Mostly diesel or gas contaminated by water or solvents

Used and/or Polluted Oil.
Utilized electric motor oils and/or mineral oils unfit for their originally meant usage. Generally motor/gear box oil (approx. 80%) infected by a combination of white spirit and also acetone (approx. 5%) hydraulic liquid (approx 5%)

Contaminated Water.
Waste oils/water, leaches, hydrocarbons/water mixtures, emulsions and also leachate

Infected Dirt.
Dirt polluted by oil gas of chemicals,.
Soil contaminated that has to be reused in landfill,.
Soil dealt with as well as changed on site

Oil Polluted Solids.
Cloths, absorbents, cardboard, oil and fuel filters, air filters are not considered as unsafe products

Electronic Waste.
Waste electrical or digital appliances or settings up, including printed circuit boards having harmful product and/or hefty metal and/or discharging reduced radiation

Utilized Battery Cells.
Dry battery, ups battery or other kinds unsorted waste batteries/battery cells, having products that are harmful

Used Lead Acid Batteries.
Waste lead acid batteries, drained/ un-drained as well as whole or smashed

Hazardous Medical Waste.
Scientific as well as associated waste emerging from clinical, nursing or similar methods and waste produced in facilities during the examination or treatment of people (biography threat)

Ended Medicines Strong.
Waste drugs, drugs as well as medications, consisting of sensitive medicines

Expired Medicines Liquid.
Waste liquid pharmaceuticals, various type fluid chemicals for treatment, medical oil as well as paraffin based ended medications

Ended and/Or Contaminated Food.
Spoiled fresh food or pointless dish prepared to eat meals (MRE’s) completely dry food

Incinerators Organic waste disposal system (incinerator)

Burner must satisfy the adhering to specifications:

— Combustion capacity( kW )= 581+/ -10 %

— Combustion capacity( kcal/h )= 500,000 +/ -10%

— Max. l/h( at approx. 50% water content )= 100+/ -10%

Further specifications will be offered with the query.

The burner will be fully self contained.

The burner plant shall include a control board for its procedure. On the control panel we shall have an aesthetic display screen of the chamber temperatures. This visual screen should manage as well as check the incinerator and also his performance.

Ability of destruction in weight will be 60 Kg/h.

It should have the ability to run not less than 10 hours/day

This incinerator must be able to ruin all combustible wastes produced by medical facilities, personal centers, research laboratories, institutes, and so on.

Style Spec: Kinds A, B, C, D, and also E of clinical waste

“PYROLYTIC” burning, by regulating the gasification of waste.

The incinerator need to stay clear of the release of black smoke and fine dust, during the loadings.

It will be able to decrease the quantity of wastes by 98%.

It will be able to hold discharge in the 2nd burn with gas residence of not less than 2 seconds.

The incineration need to be entirely free from visible smoke as well as offending smells.

1.0 The primary ignition heater shall providing ignition of the waste to 850 ° C and must turn off to conserve gas.

The main combustion chamber will be created from hefty steel plate as well as the system is internally lined with a full layer of hote face refractory as well as high performance insulation.

The Internal size of the Smokeshaft at the very least:? 400 and its elevation: 8 m

The Quantity of the combustion chamber a minimum of: 1.200 L

The Measurement of the door for filling in cm a minimum of: 70 × 70.

Burner procedure ought to be Automatic On/Off Fuel?: diesel

Manufacturer to give necessary details for the very best of the installment

The control board shall have all suitable audible and aesthetic alarms to make sure safe operation.

This burner with” PYROLYTIC “burning need to have: 1.
A burning chamber of waste: oPerfectly tight door for the hands-on loading of waste. The loading should be Manual, Set Load oA heater of lighting which the use is restricted to the ignition of waste. oFrontage of loading with door seals increased on joints, wheel of screw plug, flexible joint, as well as stuffing protecting out of refractory. oThe insulation of the burning chamber need to be composed of refractory bricks, having a high web content of aluminium as well as insulates bricks in order to ensure a minimum temperature outside sheet metal. o Structure of the refractory;

? Refractory concrete:. Density: ≥ 100 mm. Nature: 42 %of Al203? Insulate in fibrous panels: Thickness: ≥ 75 mm Nature: Calcium silicate.? Burner of illumination of waste, with fuel, conventional mono-bloc spreading directing plunging fire, illumination and also safety and security of digital ignition, irreversible ventilation,
electromagnetic sluice gate of regulation and isolating valve.
Plate of combustion in Carborundum, preventing the fixing of glass as well as slags

A chamber of post burning of gases oA heater of burning of gases, oA gadget of injection of air allowing a complete recombustion of gases, oA tool of air inlet of air conditioning of waste gases, oA sheath of discharge of the gases charred. oCarcass in solid
sheet steel with assistance of connection. oComposition of the refractory;? Refractory concrete:? Thickness: ≥ 150 mm? Nature: 65% of Al203? Insulate in fibrous panel:? Density: ≥ 85 mm? Nature: Calcium oBurner with gas, mono-bloc spreading directing kind with straight flame, illumination as well as safety and security of digital ignition, long-term ventilation, electromagnetic sluice entrance of regulation and also separating shutoff.
oA second shot of air to guarantee excellent oxygen material.

A control box guaranteeing the complete cycle of combustion.

Follower: oElectro-ventilator dispersing the second air, the regulation of the air circulation being carried out by valves and also adhering to the control of the automated cycle. Controls and also guidelines: Control box watertight to dust, consisting of:

A button circuit breaker for every engine (ventilators as well as burners). A timer with flexible temporization for the guideline of each burner. A regulator with watch for the temperature level of burning. A regulatory authority with digital watching for the temperature of message burning. Electric box

The secondary
burning chamber should damage the pollutant item and must resist to high temperature( 1100 ° C)

Refine Filtering system: Scruber to be mentionned as optional

● Able to shed 25-30kg per hour
● Consist of 2 chambers to make certain substantial decrease in exhaust
● Be capable of temperature level in range of 800c to 1000c
● Low upkeep style
● Has to be Gasoline
● Required greater than 15amp 220- 250V power
● kW Consumption power usage to be specified
● Onboard or built-in gas storage space storage tank & & should make use of no greater than 12L of passes away el per hr to shed 25-30kg of waste
● Strong waste decrease in variety of 90-97% (ought to be regularly attained).
· General wastes created on a daily basis include paper, plastic, natural products, boxes, plastic containers, leaves, etc;

· Total waste created each day: 10-12 tonnes;

· Hours of Operation: 10 hrs a day;

· Fuel requirement: Diesel or waste oil chosen yet LP gas will be thought about;.
Gas choices Oil.
Gas usage (diesel) 10 litre/hour.
Typical Capability 900kg.
Diamention: Size (mm).
Size (mm).
Elevation Excl. Flue (mm).
Door Opening (mm) 2570.
1120.
1340.
1000 × 1670.
Interior Chamber Dimen:.
Size (mm).
Size (mm).
Elevation Incl Flue (mm).
2200.
790.
790.
Operation:.
Minutes. Operation Temprature.
Max. Procedure Temprature.
House Time in Second Chamber.
Temprature Tracking.
950.
1320

2 sec.
OF COURSE.
Secret Features.
– Auto ignition.
– Automatic control and temprature.
– Upto 250 kg per hr.
– Thick refratory lining rated to 1600 deg C in main chamber retain warmth, increase efficiency.
– Warm immune 5 mm steel.
– Stainless-steel stack.
-12 cm of refractory cellular lining- steel reinforced.
-12 month or 1000 hours waranty.
– Warm recovery system.
– Wide door for ash removal.
– Huge leading opening lid for simple filling