In many workshops, in order to ensure the cleanliness of the workshop, some workshops will install an air bath or air shower room near the door of the workshop to ensure that every worker who enters the workshop will not bring it with you. Into the dust. But in the process of operating the air bath dust room , what problems need to be paid attention to? The following will give you an introduction:

The door of the entrance cannot be opened at the same time. If there is air blowing out, before stopping, prevent the door on the side of the dust bath from opening. When entering the dust-bath room, you must enter according to the maximum occupancy of the air-bath room . When you come out, there will be no more than 10 people.

In the air-bath room , you need to stand according to the specified position, and when the air is bathed, you also need to rotate your body and slap your body without sinking, so that the dust can be better blown off. It is necessary to step on the foot pads with your feet many times, which is also very beneficial for removing dust and foreign objects from the soles. When each worker enters the workshop to work, he needs to clean the dust on his body in the air bath dust room , so as not to bring external dust into the workshop and pollute the environment in the workshop, which is not conducive to working in the workshop. Come to work.

Before the worker enters the workshop, the dust-free clothing is not allowed to touch the walls, floors and other places. It is also impossible to touch the air outlet. During installation, it is necessary to confirm it regularly, and it is also necessary to record whether the position of the air outlet is correct. As for the filter of the return air outlet, the best replacement frequency should be controlled at one season/time. Once damaged or dirty, it needs to be replaced immediately. At the same time, when replacing, you need to notify the factory to deal with it, and record it in the inspection table of the dust bath room.

It seems that when operating the air bath dust room , there are indeed many points in this operation that need to be paid attention to. If you don’t pay attention to it, some problems may occur during use. The correct use of the dust-bathroom will have a very negative impact.

Product Features:

l    Outer frame: galvanized frame, aluminum alloy frame or stainless steel frame

l    Frame thickness: 10, 15, 21, 25, 46MM, etc.

l    Filter material: expanded aluminum foil mesh, stainless steel mesh, etc., which can be cleaned repeatedly, which is extremely economical

l    Maximum temperature: above 250℃

l    Maximum humidity: 99%

l    Efficiency: G2, G3 (EN779)

Applications:

l    Coarse filtration of air conditioning in general buildings

l    Primary filtration of industrial air ventilation equipment

l    A ventilation system that requires acid and alkali resistance, high strength, and high temperature resistance

l    Painting room filtration in automobile assembly workshop

Initial resistance-air volume relationship curve

Common specifications and performance parameters

1. In case of specification and structure changes, the latest data provided by our company shall prevail

2. The company accepts orders for non-listed filter products

Duct type automatic rolling shutter filters are mainly used in industries such as food, medicine, and high-precision instruments. The commonality of these industries is that they have high requirements for cleanliness. The installation and transportation of the filter before use have certain operating specifications, and the subsequent maintenance also needs to be scientific and reasonable.
1. During the transportation of the air duct type automatic rolling filter , you must be careful and handle it with care. Prevent damage to the inside of the filter device during the process, especially the filter screen.
2. Pay special attention to the bumping problem. Don’t use too much impact force to avoid damage.
3. There are also certain requirements for the handlers, no corrosive liquids on the hands, so as not to cause corrosion of the equipment.
4. The temporary storage location should be relatively constant temperature, and the humidity should meet the highest humidity requirements of the equipment, and the ventilation of the storage location should be ensured. After transportation to the relevant equipment use location, the equipment should be debugged and installed.
5. Prior to this, prepare for the installation location. Temperature, pressure, and humidity are all reference factors, because if the conditions are not suitable, the life of the equipment will be shortened, and problems will also occur during use.
6. It is also inevitable to check the basic condition of the equipment before installation, so as to avoid damaged or deformed places, it is difficult to repair after installation. The most important thing to pay attention to during installation is the guarantee of sealing performance.
7. At the same time, the airflow direction of the air inlet and outlet should be scientific and reasonable. After the installation is completed, a person from the manufacturer is responsible for the equipment debugging. If there is no problem after the debugging, it can be put into production.
8. In the later period of use , the filter cleanliness of the air duct type automatic rolling curtain filter needs to be tested regularly, and it must meet the standards required for production. If the standard is not met, find out the reason immediately.
In addition, the maintenance and maintenance in the later period should not be tired. The company arranges special personnel for regular maintenance and maintenance operations, especially when the air duct type automatic winding filter is not used for a long time, regular maintenance and maintenance should be performed to prevent damage to equipment parts .

Product Features:

l    Outer frame: galvanized frame, aluminum alloy frame or stainless steel frame

l    Frame thickness: 21, 46, 50, 96MM, etc.

l    Filter material: glass fiber, laminated in a non-woven way, the fiber has good strength and elasticity, and will not affect the dust holding capacity due to wind resistance and compression

l    Maximum temperature: 250℃ 350℃ 450℃ 680℃

l    Maximum humidity: 99%

l    Efficiency: G3, G4, F5 (EN779)

Applications:

l    Hot air type high temperature oven

l    High temperature oven for painting factory

l    Various other high temperature ventilation systems

Initial resistance-air volume relationship curve

Common specifications and performance parameters

The quick-rolling door air shower is a kind of purification equipment that is widely used, which can effectively and efficiently reduce the entry of dust and pollution sources. Therefore, many companies in need will use the air shower, especially in the food processing industry. The air shower is the most widely used. The air shower needs to be operated in accordance with the regulations in the use of the air shower. Later, it needs to be maintained and maintained in accordance with the specifications. What aspects should be paid attention to in the early transportation and storage of the shower room?

1. The phenomenon of bumps and bumps must be reduced during transportation, not only for the appearance, but also for the internal protection of the equipment. After the rapid rolling door air shower room is produced, it must be loaded and transported. Pay attention to the sanitation of the vehicle to avoid damage. Contaminants cause pollution of the cabinet.

2. It is necessary to wrap the corners to prevent the abrasion of the corners and corners. After that, they can be wrapped with packaging materials with good airtight performance such as cling film, which can prevent the entry of moisture and rain, and achieve the effect of moisture and moisture prevention.

3. The best choice of packaging tools is wood, which can prevent impact and ensure the dryness of the product.

4. Do not invert and bump during transportation. During loading and unloading, ensure that the equipment is handled gently and after unloading, the integrity of the equipment must be maintained to prevent parts from being lost.

5. For the selection of storage warehouses for manufacturers, manufacturers should refer to the two conditions of humidity and ventilation to ensure that the storage conditions of the equipment meet the requirements of the equipment and ensure the best performance of the air shower.

6. The storage temperature of the air shower room of the fast rolling door is prohibited to exceed 50 degrees Celsius, and the humidity does not exceed 80% . The storage location is forbidden to use with open flames. Manufacturers and demand companies must comply with the above requirements in transportation and storage to ensure the good performance of the equipment.

The above are the precautions for the transportation and storage of the fast rolling door air shower room . All companies must strictly abide by it. It has high performance and sealing performance, which is a condition that many other dust removal and filtration equipment cannot achieve. Simple operation, low operating noise, good sealing performance, and good filtering and dust removal effects are all its advantages. Therefore, for companies to ensure the transportation and storage of the equipment can ensure that the most basic performance of the equipment is not damaged.

Product Features:

l    Outer frame: paper frame, plastic frame, galvanized frame, aluminum alloy frame or stainless steel frame

l    Frame thickness: 21, 46, 50, 96MM, etc.

l    Filter material: It is made of ultrafine fiber and coconut shell activated carbon after special treatment. It is not easy to fall off and is easy to be formed by hot pressing. It has uniform thickness, good air permeability, no peculiar smell, high carbon content, and can effectively absorb various industrial waste gas, such as Benzene, aldehyde, radon gas, sulfur dioxide, hydrogen chloride, etc.

l    Maximum temperature: 98°C

l    Maximum humidity: 99%

l    Efficiency: G2, G3, G4 (EN779)

Applications:

l    Pre-filtration of air-conditioning and ventilation systems to avoid dust pollution inside the system

l    Large air compressor pre-filtration

l    The return air filtration of the clean room centralized ventilation and air-conditioning system extends the service life of the high-grade filter

l    The ventilation system of ordinary industrial plants meets the general clean air requirements

l    Coarse filtration of air conditioning in general buildings

l    It can be widely used in various air conditioning and ventilation systems, and it has both dust removal and deodorization functions to effectively improve indoor air quality

Initial resistance-air volume relationship curve

Common specifications and performance parameters

1. In case of specification and structure changes, the latest data provided by our company shall prevail

2. The company accepts orders for non-listed filter products

As we all know, the air contains a lot of dust, which is generally harmless to the human body. However, with the development of industry and changes in the ecological environment, the dust in the air has exceeded the range of people’s tolerance. They have been working and living in such an environment for a long time. , It is a great threat to human health, so various filters have been produced. Among them , the roller curtain air filter is widely used with its unique advantages. It is mainly responsible for removing particulate impurities in the air. Let us take a look at its specific advantages.

1. Large filtration area

There are many specifications of the roller shutter air filter , but the most important point is that the filter area is large, which is suitable for the environment that requires a large area and large-scale treatment of harmful particles in the air, and the effect of a single filter is better than that of ordinary filters. .

2. Low operating cost

Most of the roller blind filter adopts automatic control system, and at the same time, it can precisely control the winding length of the filter material, which can save the filter material, and the price of the filter material itself is not high;

3. Long service life

This is mainly from the perspective of filter material replacement. A roll of filter material can be used multiple times for a long time without the need to shut down and replace each time. At the same time, the frame around the filter material can be used permanently;

4. Simple maintenance

On the one hand, the filter material does not need to be disassembled and cleaned frequently, and there is no need to manually replace the filter material on a new side, which greatly saves manpower. The staff needs to pay attention to it at any time in the central control room.

The rolling curtain air filter has simple structure, convenient production and processing, and easy installation. For the user, it is simple to operate and hassle-free maintenance. It is a good air filter and is suitable for various places, especially for large air volumes. Purification of low wind pressure environment.

Roller curtain air filter has its indispensable position. We know that many industrial production must be carried out in a relatively clean space, such as pharmaceutical factories, precision electronics, and other environments. There should be no dust in these environments, so air filters are needed. , To ensure that the air in the environment is clean.

Product Features:

l    Frame: paper, galvanized steel, aluminum alloy

l    Frame thickness: 21, 46, 96MM, etc.

l    Filter material: polyester fiber with high dust holding capacity and low resistance

l    Maximum temperature: 80℃

l    Maximum humidity: 99%

l    Efficiency: G2, G3, G4 (EN779)

Applications:

l    Pre-filtration of air-conditioning and ventilation systems to avoid dust pollution inside the system

l    Large air compressor pre-filtration

l    The return air filtration of the clean room centralized ventilation and air-conditioning system extends the service life of the high-grade filter

l    The ventilation system of ordinary industrial plants meets the general clean air requirements

l    Coarse filtration of air conditioning in general buildings

Initial resistance-air volume relationship curve

Common specifications and performance parameters

1. In case of specification and structure changes, the latest data provided by our company shall prevail

2. The company accepts orders for filters that are not specified in the table

Product Features:

l Outer frame: plastic frame, galvanized frame, aluminum alloy frame or stainless steel frame

l    Frame thickness: 10, 15, 21, 46, 50, 65, 70, 80, 96MM, etc.

l    Filter material: polyester fiber with high dust holding capacity and low resistance, can be cleaned 2-3 times

l    Maximum temperature: 98°C

l    Maximum humidity: 99%

l    Efficiency: G2, G3, G4 (EN779)

Applications:

l    Pre-filtration of air-conditioning and ventilation systems to avoid dust pollution inside the system

l     Large air compressor pre-filtration

l    The return air filtration of the clean room centralized ventilation and air-conditioning system extends the service life of the high-grade filter

l    The ventilation system of ordinary industrial plants meets the general clean air requirements

l Coarse filtration of air conditioning in general buildings

Initial resistance and air volume relationship curve

Common specifications and performance parameters

1. In case of specification and structure changes, the latest data provided by our company shall prevail

2. The company accepts orders for non-listed filter products

Rolling curtain air filter is a kind of filter with very good sales for the company. Many factories will adopt such a set of filtering equipment. Therefore, many people have seen such equipment, but maybe not many people know it The working principle of, today I will popularize the knowledge for everyone, let you know what is the working principle of the roller shutter filter?

For this set of equipment, the main filtering function is the upper filter material . There is a loading box in the roll-up filter . When the air blown in from the air conditioner enters the filter, the dust in it will be affected. Stay in the filter, but with the extension of working time, the dust content in the filter material will increase, in this case the pressure difference between the front and rear of the filter will also change.

As the pressure difference increases, the resistance of the filter will increase, and when this value reaches the originally set range, the pressure difference switch will be activated. After the switch is activated, the motor will be connected to the power supply, which is the whole device will start to work.

Then the filter material is driven to rotate through the roller blind device, so that the new filter material can replace the used filter material, and the motor will be turned off again after this work is completed.

The control of the entire system is controlled by a photoelectric system. In this case, it can ensure that the filter material is replaced more accurately, and only the filter material can be completely replaced without wasting new filter material.

Since the control of this equipment is automated, you only need to manually input and save the data when using the equipment, and there is no need to manually operate during the work process, so many factories are happy to use such equipment In order to save labor costs, and also because the control of the machine is always more precise than the control of the human.

This is the working principle of the roller blind filter . Because of its working principle, the whole equipment has a very good effect when working. It not only has the powerful function of filtering air, but also is very convenient to control.