Product Introduction

The air shower is a device for purifying people and preventing polluted air from entering the clean area. It uses high-speed clean airflow to remove dust particles on the surface of clothing or materials on personnel. At the same time, it also functions as an air lock room to prevent outdoor air from polluting the clean room or low-level to high-level clean room.

The energy-saving type is the latest air shower room developed by our company. The product design saves the number of fans and filters on the basis of ensuring the wind speed of the standard air shower room, which not only saves electricity, but also saves the consumables of the filters in the later stage. The trend of carbon environmental protection.

Product Features:

The air in the air shower room is pressed into the static pressure box by the fan through the primary filter, purified by the high-efficiency filter, and ejected from the nozzle at high speed, thereby blowing away the dust attached to the person and the surface of the carried objects, and preventing unpurified air Enter the purification area.

The automatic door type cargo shower room is specially designed for forklifts and large cargoes to enter and exit. It can automatically open and close the door (and manual control) when entering and exiting, which is convenient for entering and exiting and improving work efficiency. It also has electronic interlocking function and can be used as a The buffer room of the dust room. Prevent cross-contamination caused by personnel and goods entering and exiting.

Product Features:

*The product structure is sturdy and easy to install

* The PLC control system is stable and efficient. If there is a power failure, the air shower door will automatically unlock

* Initial high-efficiency two-stage filtration, high-efficiency efficiency up to 99.99% [email protected]

* High wind speed 360 degree adjustable stainless steel nozzle

* Easy to replace the initial and efficient devices

* Equipped with special purification lamp for clean room

* Adjustable blowing time (10-99 seconds)

* With German brand door closer.

* Reliable interlock function

* Equipped with emergency stop button

Standard drawing

Technical Parameters

Show details

360 degree adjustable direction stainless steel nozzle

German famous brand door closer

High static pressure and large air volume motor

U.S. HV imported filter paper high efficiency filter

Product Introduction

The air shower is a device for purifying people and preventing polluted air from entering the clean area. It uses high-speed clean airflow to remove dust particles on the surface of clothing or materials on personnel. At the same time, it also functions as an air lock room to prevent outdoor air from polluting the clean room or low-level to high-level clean room.

The L-shaped corner type is suitable for the dust-free workshop and the buffer area are not in the same straight line position, and the L -shaped connection is required, which can save space, make the walking route smoother, and improve the traffic efficiency.

Product Features:

The air in the air shower room is pressed into the static pressure box by the fan through the primary filter, purified by the high-efficiency filter, and ejected from the nozzle at high speed, thereby blowing away the dust attached to the person and the surface of the carried objects, and preventing unpurified air Enter the purification area.

The automatic door type cargo shower room is specially designed for forklifts and large cargoes to enter and exit. It can automatically open and close the door (and manual control) when entering and exiting, which is convenient for entering and exiting and improving work efficiency. It also has electronic interlocking function and can be used as a The buffer room of the dust room. Prevent cross-contamination caused by personnel and goods entering and exiting.

Product Features:

*The product structure is sturdy and easy to install
* The PLC control system is stable and efficient. If there is a power failure, the air shower door will automatically unlock
* Initial high-efficiency two-stage filtration, high-efficiency efficiency up to 99.99% [email protected]

* High wind speed 360 degree adjustable stainless steel nozzle

* Easy to replace the initial and efficient devices
* Equipped with special purification lamp for clean room
* Adjustable blowing time (10-99 seconds)
* With German brand door closer.

* Reliable interlock function
* Equipped with emergency stop button

Standard drawing

Technical Parameters

Show details

360 degree adjustable direction stainless steel nozzle

German famous brand door closer

High static pressure and large air volume motor

U.S. HV imported filter paper high efficiency filter

Product Introduction

The air shower is a device for purifying people and preventing polluted air from entering the clean area. It uses high-speed clean airflow to remove dust particles on the surface of clothing or materials on personnel. At the same time, it also functions as an air lock room to prevent outdoor air from polluting the clean room or low-level to high-level clean room.

The straight-through air shower room is one of the most commonly used designs. Its two doors are split, the shape is simple and beautiful, and it has an interlocking function. It can be used as a buffer room for different levels of clean rooms to prevent cross-contamination when people enter and exit.

Product Features:

The air in the air shower room is pressed into the static pressure box by the fan through the primary filter, purified by the high-efficiency filter, and ejected from the nozzle at high speed, thereby blowing away the dust attached to the person and the surface of the carried objects, and preventing unpurified air Enter the purification area.  

Product Features:

*The product structure is sturdy and easy to install
* The PLC control system is stable and efficient. If there is a power failure, the air shower door will automatically unlock
* Initial high-efficiency two-stage filtration, high-efficiency efficiency up to 99.99% [email protected]

* High wind speed 360 degree adjustable stainless steel nozzle

* Easy to replace the initial and efficient devices
* Equipped with special purification lamp for clean room
* Adjustable blowing time (10-99 seconds)
* With German brand door closer.

* Reliable interlock function
* Equipped with emergency stop button

Standard drawing

Technical Parameters:

Show details

360 degree adjustable direction stainless steel nozzle

German famous brand door closer

High static pressure and large air volume motor

U.S. HV imported filter paper high efficiency filter

Product Introduction

FFU is a modular terminal air supply device with its own power and filtering function. The air blower sucks in the air from the top of the FFU and is filtered by HEPA. The filtered clean air is sent out evenly at a wind speed of 0.45m/s±20% on the entire air outlet surface.

FFU can be modularly connected and used, making FFU widely used in clean rooms, clean operation tables, clean production lines, assembled clean rooms and local hundreds of applications.

Product Usage:

FFU is widely used in clean rooms, clean operation tables, clean production lines, assembled clean rooms and local hundreds of applications. It can provide high-quality clean air for clean rooms and microenvironments of different sizes and different cleanliness levels. It is suitable for high cleanliness occasions such as semiconductor, electronics, LCD, hard disk, optics, biological industry, etc., quickly occupying the market with unique advantages and reasonable prices.

Product Features:

★ A variety of ways can be used to control the speed;

★ Low operating power consumption, reducing costs;

★ Built-in air duct diversion system to reduce noise and pressure loss and improve fan efficiency;

★ German EBM original backward-inclining centrifugal fan can provide high air volume. High static pressure conditions, the working life is more than 50,000 hours;

★ Suitable for use in clean rooms with cleanliness of Class1-1000;

★It is especially suitable for assembling into a super-clean production line, which can be arranged as a single unit according to the process needs, or multiple units can be connected in series to form a 100-stage assembly line;

★ Before leaving the factory, the products are in accordance with the US Federal Standard 209E, and the dust particle counter is used for scanning and testing one by one to ensure the quality.

Standard drawing

Technical Parameters

Product Introduction

The air shower is a device for purifying people and preventing polluted air from entering the clean area. It uses high-speed clean airflow to remove dust particles on the surface of clothing or materials on personnel. At the same time, it also functions as an air lock room to prevent outdoor air from polluting the clean room or low-level to high-level clean room.

The tunnel-type air shower is suitable for clean room workshops with a large area and a large number of users. The air shower room is equipped with stainless steel columns, which can control the personnel to walk along the S-shaped route. The dust removal process is more comprehensive and thorough.

Product Features:

The air in the air shower room is pressed into the static pressure box by the fan through the primary filter, purified by the high-efficiency filter, and ejected from the nozzle at high speed, thereby blowing away the dust attached to the person and the surface of the carried objects, and preventing unpurified air Enter the purification area.

Product Features:

*The product structure is sturdy and easy to install
* The PLC control system is stable and efficient. If there is a power failure, the air shower door will automatically unlock
* Initial high-efficiency two-stage filtration, high-efficiency efficiency up to 99.99% [email protected]

* High wind speed 360 degree adjustable stainless steel nozzle

* Easy to replace the initial and efficient devices
* Equipped with special purification lamp for clean room
* Adjustable blowing time (10-99 seconds)
* With German brand door closer.

* Reliable interlock function
* Equipped with emergency stop button

Standard drawing

Technical Parameters

Show details

360 degree adjustable direction stainless steel nozzle

German famous brand door closer

High static pressure and large air volume motor

U.S. HV imported filter paper high efficiency filter

Product Introduction

The clean shed is the fastest and most convenient to build a simple clean room. It uses industrial aluminum (or stainless steel, cold plate square tube) as the frame, uses its own fan filter unit (FFU) to supply air, and uses anti-static soft curtains (or Acrylic board) enclosure, the internal purification level can reach 100 to 100,000.

It is suitable for local areas in the workshop that require high cleanliness, such as assembly line operation area and high-precision product assembly area.

working principle:

The air blower sucks in the air from the top of the FFU. After initial efficiency and high-efficiency filtration, the filtered clean air is sent to the clean shed at the air outlet surface at a uniform speed to form a current uniform layer, and the air flow is unidirectional, thus ensuring the requirements in the working area. The cleanliness of safety.

Product Features:

* Assembled design, easy to install, greatly shortening the delivery cycle;

* Easy to move, silent universal wheel can be installed;

* Suitable for the construction of small clean areas;

* Modular structure, easy to improve the purification level, strong scalability, and high value of reuse;

* Relative to the ultra-clean workbench, the available internal space is large;

* Compared with the traditional clean room, the cost is low, the construction is fast, and the floor height is not limited.

Product configuration:

         1. Specifications: This product has no finalized specifications, and it is made according to the needs of customers.

2. Frame: Aluminum profile (stable, beautiful, no rust, no dust)

         3. Static curtain: 0.5mmT grid (good anti-static effect, high transparency, clear grid, good flexibility, no deformation, not easy to aging, dustproof and antistatic)

         4. The top cover of the clean room is made of 3mmT aluminum-plastic plate

        5. Partial use of special purification lamps for clean rooms

         6. Filter unit FFU: Adopt AC AC centrifugal fan, specification 1175*575*250mm, initial high-efficiency two-stage filtration system, filtration efficiency 99.99% (0.3um), adjustable wind speed, maximum air volume: 1200m3/h); The characteristics of long life, low noise, maintenance-free, low vibration, stepless speed change, etc. The fan is of reliable quality, long working life and unique air duct design, which greatly improves the efficiency of the fan and reduces noise

        7. FFU fan filter units are arranged at intervals on the top to achieve ten thousand purification levels

Standard drawing

Product introduction:

The automatic winding filter is actually a new type of air filtering equipment. It is an automatic equipment that realizes the replacement of filter materials by converting the pressure difference between the front and rear of the filter into a sensor signal. Explosion-proof spiral filter is a special filter equipment that is used in special industries such as chemical plants and has hidden dangers of flammable and explosive media.

working principle

It is mainly composed of filter material, explosion-proof transmission system and explosion-proof automatic control system.

The new filter material is installed in the loading box. When the intake air with high concentration of dusty air passes through the winding filter, the pressure difference between the front and rear of the filter gradually increases with the increase of the dust; when the filter resistance rises to the set final resistance When the value is reached, the pressure difference switch starts to act, and the winding system updates the filter material; when the rolling time is reached, the transmission is stopped, the update of the filter material is completed, and the filter is restarted.

Product Features:

* Comply with explosion-proof grade Eexd IIBT4, protection grade IP55

* Sturdy structure, can meet the harshest working environment

* Intelligent filter material replacement system, effectively saving energy and reducing costs *Modular design can meet any type of system design and installation requirements

* Different materials and configuration options for low, medium and high-end to meet customer differentiated needs

Ex Explosion-proof General Mark ib Class Intrinsically Safe Type
II Plant explosion-proof equipment
B Applicable occasions flammable and explosive gases are Class B gases (including Class A gases)
T4 of the device does not exceed the maximum surface temperature of 135 degrees

Material: high-quality cold-rolled steel plate paint, aluminum profile or SUS 304

Control: manual, time/pressure difference control, photoelectric control, PLC control

Filter material: dedicated mesh filter material, G3, G4 (EN779) efficiency

Installation: The finished product can be operated at the delivery site only if it is powered on. If the on-site installation space is limited, the parts can be packaged and shipped, and the goods can be assembled and formed flexibly when they arrive at the site.  

Applications:

* Effectively filter the fresh air in the clean room with large particles of air to provide more qualified air into the clean room;

* Effectively prevent the appearance of stains around the fresh air outlet of the air conditioner, and the service life of the middle-efficiency high-efficiency filter in the back section of the palace is long;

* Effectively prevent serious dust accumulation in the blower of the sewage treatment plant, and install it at the front end of the blower to effectively protect the blower;

* For the air filter system of chemical plants, textile factories, spraying workshops, etc., perform initial filtration to remove most of the particulate matter and effectively improve the quality of exhaust gas and circulating gas.

Control function details:

Product size and air volume parameter table

Note: 1. The air volume value calculated at the above wind speed @2.5m/s

2. When the width>06ft, it needs to be divided into multiple units and assembled

   3. Can provide customers with a variety of non-standard size customization

Standard drawing

In response to the needs of our customers, the company has introduced an upgraded automatic winding air filter with a pipe reducing and flange mouth, which is convenient for the front and back connection with the blower, air conditioning unit, humidifier, muffler equipment, etc., avoiding the customer alone The problem that the on-site installation fails to fix the connection after purchasing the wound filter.

l   Duct type housing + vertical winding filter

Often used in environments where space is not restricted  

l Air duct shell + horizontal winding filter

Horizontal automatic winding filters are often used in small or short spaces. When the space height is limited, we must strictly consider the effective filter area to meet the required air volume. The wide and long design of the horizontal automatic winding filter can be installed in a small space and can meet the air volume design requirements.

When the automatic winding filter is used to filter harmful particles or irritating gases, the operator has to enter the closed space of harmful dust or irritating gases when replacing the raw material. The operator will be injured. Through the patented design of the filter box type horizontal automatic winding filter, the operator does not need to enter the operation to replace the filter material, which is very safe and convenient

Control function details:

Product size and air volume parameter table

Note: 1. The air volume value calculated at the above wind speed @2.5m/s

2. When the width>06ft, it needs to be divided into multiple units and assembled

3. Can provide customers with a variety of non-standard size customization

Standard drawings:

Product introduction:

The automatic winding filter is actually a new type of air filtering equipment. It is an automatic equipment that realizes the replacement of filter materials by converting the pressure difference between the front and rear of the filter into a sensor signal.

working principle

It is mainly composed of filter material, transmission system and automatic control system.

The new filter material is installed in the loading box. When the intake air with high concentration of dusty air passes through the winding filter, the pressure difference between the front and rear of the filter gradually increases with the increase of the dust; when the filter resistance rises to the set final resistance When the value is reached, the pressure difference switch starts to act, and the winding system updates the filter material; when the rolling time is reached, the transmission is stopped, the update of the filter material is completed, and the filter is restarted.  

Product Features:

* Sturdy structure, can meet the harshest working environment

* Intelligent filter material replacement system, effectively saving energy and reducing costs *Modular design can meet any type of system design and installation requirements

* Different materials and configuration options for low, medium and high-end to meet customer differentiated needs

Material: high-quality cold-rolled steel plate paint, aluminum profile or SUS 304

Control: manual, time/pressure difference control, photoelectric control, PLC control

Filter material: dedicated mesh filter material, G3, G4 (EN779) efficiency

Installation: The finished product can be operated at the delivery site only if it is powered on. If the on-site installation space is limited, the parts can be packaged and shipped, and the goods can be assembled and formed flexibly when they arrive at the site.

Applications:

* Effectively filter the fresh air in the clean room with large particles of air to provide more qualified air into the clean room;

* Effectively prevent the appearance of stains around the fresh air outlet of the air conditioner, and the service life of the middle-efficiency high-efficiency filter in the back section of the palace is long;

* Effectively prevent serious dust accumulation in the blower of the sewage treatment plant, and install it at the front end of the blower to effectively protect the blower;

* For the air filter system of chemical plants, textile factories, spraying workshops, etc., perform initial filtration to remove most of the particulate matter and effectively improve the quality of exhaust gas and circulating gas.

Control function details:

Product size and air volume parameter table

Note: 1. The air volume value calculated at the above wind speed @2.5m/s  

2. When the width>06ft, it needs to be divided into multiple units and assembled

   3. Can provide customers with a variety of non-standard size customization

Standard drawing

Product introduction:

The automatic winding filter is actually a new type of air filtering equipment. It is an automatic equipment that realizes the replacement of filter materials by converting the pressure difference between the front and rear of the filter into a sensor signal.

working principle

It is mainly composed of filter material, transmission system and automatic control system.

The new filter material is installed in the loading box. When the intake air with high concentration of dusty air passes through the winding filter, the pressure difference between the front and rear of the filter gradually increases with the increase of the dust; when the filter resistance rises to the set final resistance When the value is reached, the pressure difference switch starts to act, and the winding system updates the filter material; when the rolling time is reached, the transmission is stopped, the update of the filter material is completed, and the filter is restarted.

Product Features:

* Sturdy structure, can meet the harshest working environment

* Intelligent filter material replacement system, effectively saving energy and reducing costs

* Modular design can meet any type of system design and installation requirements

* Different materials and configuration options for low, medium and high-end to meet customer differentiated needs

Material: high-quality cold-rolled steel plate paint, aluminum profile or SUS 304

Control: manual, time/pressure difference control, photoelectric control, PLC control

Filter material: dedicated mesh filter material, G3, G4 (EN779) efficiency

Installation: The finished product can be operated at the delivery site only if it is powered on. If the on-site installation space is limited, the parts can be packaged and shipped, and the goods can be assembled and formed flexibly when they arrive at the site.

Applications:

* Effectively filter the fresh air in the clean room with large particles of air to provide more qualified air into the clean room;

* Effectively prevent the appearance of stains around the fresh air outlet of the air conditioner, and the service life of the middle-efficiency high-efficiency filter in the back section of the palace is long;

* Effectively prevent serious dust accumulation in the blower of the sewage treatment plant, and install it at the front end of the blower to effectively protect the blower;

* Efficiency of the filter within chemical plants, textile mills, paint shop air filter system, etc. First, remove most of the particulate matter, exhaust emissions and improve the quality of recycle gas.

Control function details:

Product size and air volume parameter table

Note: 1. The air volume value calculated at the above wind speed @2.5m/s

2. When the width>06ft, it needs to be divided into multiple units and assembled

   3. Can provide customers with a variety of non-standard size customization    

Standard drawing