It should be able to Operate not Less than 10 hours/day
This incinerator must be able to destruct all combustible wastes produced by hospitals, private clinics, laboratories, institutes, etc…
Design Specification: Types A, B, C, D, and E of medical waste
“PYROLYTIC” combustion, by controlling the gasification of waste.
The incinerator must avoid the release of black smoke and fine dust, (Smokeless) during the loadings.
It should be able to reduce the volume of wastes by 98%.
It should be able to hold emission in the second burn with gas residence of not less than 2 seconds.
The incineration should be completely free from visible smoke as well as offensive odours.
The lower calorific power (L.C.P) of this waste will be 3,500 kcal/kg
The Temperatures of combustion:Minimum will be 850oC and max 1400oC
Post combustion: >1100o
The Internal diameter of the Chimney: Ø 400mm² and its height: 8 Meter
The Volume of the combustion chamber: Not Less Than 2.3 M³
Burner operation should be Automatic On/Off
Fuel : diesel, LPG, Natural Gas, Bio fuel
The supplier must provide necessary information for the best of the installation
This incinerator with “PYROLYTIC” combustion must have:
A combustion chamber of waste:
* Perfectly tight door for the manual loading of waste.The loading should be Manual, Batch Load,
* A burner of lighting which the use is limited to the ignition of waste.
* Top Loading loading with door seals gone up on hinges, wheel of screw plug, flexible joint, and stuffing insulating out of refractory.
* The insulation of the combustion chamber should be composed of refractory bricks, having a high content of aluminum and insulates bricks in order to assure a minimum temperature on the outside sheet metal.
* Composition of the refractory;
Refractory concrete :
. Thickness : ≥100 mm
. Nature: 42% of Al203
Insulate in fibrous panels :
. Thickness: ≥75 mm
Nature: Calcium silicate.
* Burner of lighting of waste, with fuel, standard mono-bloc casting guiding plunging flame, lighting and safety of electronic ignition, permanent ventilation, electromagnetic sluice gate of regulation and isolating valve.
* Plate of combustion in Carborundum, avoiding the fixing of glass and slags.
Load Method: Top Loading
A chamber of post combustion of gases
* A burner of combustion of gases,
* A device of injection of air allowing a total recombustion of gases,
* A device of air inlet of cooling of waste gases,
* A sheath of evacuation of the gases burnt.
* Carcass in strong sheet steel with support of connection.
