having waste from production process which is having very fine/powder material with moisture of 40%. Will this machine suitable for this application. For power waste, proposal plus wet scrubber system.

Optional 1 section type: Wet Cooling Spray Scrubber. Function: cooling, remove dust.

Optional 3 section type: Wet Cooling Spray Scrubber+Wet Dust Scrubber+Fog and Water Separator. Function: cooling, remove dust, remove fog(from water). the exhaust temperature around 200℃.

If waste is Acidic material, add Caustic soda into the water and cost a litter higher than without Caustic soda.

If plus wet scrubber, request build cooling pool(recirculating water) at local site. recirculating water pool and Sludge sedimentation at bottom, clean Sludge regular.

2020-07-08

2020-07-07

Mounting: -floor mounted

8.1 Factory Specifications

top-loading incinerator with a lift-opening lid, providing clear access for ease of manual or mechanical loading. All controls should be placed away from the loading area to avoid damage by loading machinery. Burn program should be available and the incinerator should be left unattended until the carcass reduces to ash.

It should be highly efficient, utilizing automatic high heat-rate burners, low thermal mass linings and timer controls that ensure minimal running costs; a thermostat triggers burner shut-off when optimum temperatures are reached, increasing fuel efficiency significantly.

Burn rate should be up to 50-100kg per hour , 220-240-volt electricity & fuel supply. A comprehensive operating, care & maintenance manual should be provided with each incinerator.

Chamber Volume  0.97m3

–Load Capacity Up to 400kg

Load Method Top

Fuel Options diesel oil or natural gas or lpg type

Odour control should be provided with the incinerator, dry scrubber. Wet scrubber optional.

2020-07-07

Video material: https://twitter.com/i/status/1279030799182905345 

• Burning Waste: Medical Waste

• Fuel: diesel type, or gas type(natural gas or lpg), or both(exhcange oil-gas burner)

• Processing Capacity: 15 – 20 kg/hr  

• Door Size: 400mm x 360mm   

• Body Size: 1600*1100*2300mm(without chimney)

• Operating Temperature: 800 – 1200 deg. C   

• Double Chamber: Primary and Secondary Chambers   

• Internal lining:refractory cement

• Monitoring Facility for:  

• Supplied complete with chimney   

• Power Supply: 220-240V, 50Hz, 0.25kW

2020-07-07

Q: what is kind of waste can use in this equipment?

A: This equipment for medical waste, pet animal, Municipal waste, live waste. Prohibit any explosive and radiation material, liquid waste and gas waste.

2020-07-06

2020-07-05